N1F R/TV Outlet

Most Complete Marine TV Product Line!

In memory of the Heros of STS-107 and the Shuttle Columbia February 1, 2003

Double Isolated Radio/TV Outlets	Click here for brochure in Adobe .pdf file
Click for Specifications!	Splitters Tap-Offs



	Inquiry or Quick Quote Form

Our new N1F outlet with F connector outputs for Radio and TV double isolated to prevent ground loop interfenence. It also covers all Radio-TV frequencies from 0.1 to 890 MHz. It is also designed to take advantage of the extremely good efficiency of the Tap-Off method of "Home Run" signal distribution.

This outlet is flush mount with a 76x76mm face plate in the standard configuration. It can be made to be surface mounted by using the optional N frame that is about 1" deep and 76x76mm.

TV Cords with F fittings are available. Radio Cords with AM-FM impedance matching Splitters are also available. Click for brochure on Outlet Cords: Cords .pdf file

See specifications below:

Technical Specifications	Part #201.503F N1F and 201.503I N1 (IEC) Outlets
Frequency Range (MHz):	TV 47-68; 130-890 R 0.1-30; 88-108
Through Loss (dB):	In TV 47-68MHz 1dB nom. to 2.8dB max. In TV 130-890MHz 1dB nom. to 1.5dB max. In R 0.1-30; MHz 2.5dB nom. to 4dB max. In R 88-108MHz 1dB nom. to 1.8dB max.
Isolation:	TV-R 12dB min.
Return Loss:	In 5-890MHz 8dB min. TV 47-68MHz 8dB min. 130-890MHz 8dB min. R 88-108MHz 8dB min.
Connectors:	Input Terminal Block TV "F" or IEC Male R "F" or IEC Female
Impedance:	75 Ohms
Galvanic isolation:	400V Optional 2.5kV with reduced frequency range only with special order
Screening factor:	TV 35dB R 43dB
Operating Temp. (C):	-40-+60

Contact: Int'l. +1 (813) 961-3829; Fax (813) 283-1240

Toll Free in USA: (888) 824-7862

At Sea Electronics, Inc.

5364 Ehrlich Road, MBN 17

Tampa, FL 33624