|
|
|
|
 |
|
|
|
|
|
|
Click on Picture! |
|
|
|
Click here for brochure in Adobe .pdf file |
|
|
|
Head-end Amplifier: Use with MK20CA FM TV and VPA30 Active Whip AM FM antenna when used in tandem (Replaces Pba2205). Also use with CATV
from the pier through an A/B switch.Lineamplifier: To extend a trunk line that is too long or to feed additional outlets added later on. (Replaces LA2007) |
|
|
|
|
PSA30V-2 Amplifier Specifications: |
Approx 16 AM-SW, FM, CATV, TV Outlets depending on cable & lay-out. We offer free system design drawings and cable recommendations that
maximize signal distribution. |
Input Voltage: |
117 or 230 VAC +10/-15% (switchable) |
| |
50-60Hz |
| |
24VDC Plus or minus 17% (optional) |
Output Voltage to Antennas: |
15VDC Plus or minus 5%, 300mA Max |
Frequency Range: |
0.1-26.5Mhz & 40-890 MHz |
Gain: |
AM-SW Passive; FM, VHF, CATV, UHF Min. 17dB |
Noise Figure: |
Max. 7dB |
Output level, 2 signal 60dB IMA: |
Max. 94dBuV |
Attenuation: 0.1-110 MHz: |
0-20dB, Adjustable |
Attenuation 170-890 MHz: |
0-20dB, Adjustable |
Operating Temp Range: |
-40- +55 degrees C |
Humidity: |
<95% non condensing |
EMC: |
EN 50081-1-1/2, EIC 728 |
Safety: |
EIC 950, 65 |
|
|
